Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST60+, seatalk1, seatalk NG, ray55e, A70D and ST2000+
01-16-19, 05:40 PM (This post was last modified: 01-17-19 08:59 AM by Chuck - Raymarine - Moderator.)
Post: #19
RE: [CA11] ST60+, seatalk1, seatalk NG, ray55e, A70D and ST2000+
HI Chuck,
Finally it is all installed and all sensors (compass, log and wind) have been calibrated and appear to be giving good data. I did some trials in calm conditions with slack tide and heading/COG and Speed/SOG are closely matched.

The layout is slightly different to my last sketch. I have connected the ST 2000 to a second ST1/STng converter as you suggested earlier in the forum. Revised sketch attached.

Comms look good on both ST1 and STng with data sharing across the wind, depth, tiller pilot, plotter and ST60+ Graphic.
Thanks for your help in getting this far.

Regards
Dave Davies.


Attached File(s)
.pdf  Untitled 2.pdf (Size: 594.23 KB / Downloads: 313)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] ST60+, seatalk1, seatalk NG, ray55e, A70D and ST2000+ - dave.squared@hotmail.com - 01-16-19 05:40 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)