Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] ST60+, seatalk1, seatalk NG, ray55e, A70D and ST2000+
04-11-19, 06:14 PM (This post was last modified: 04-12-19 07:53 AM by Chuck - Raymarine - Moderator.)
Post: #23
RE: [CA11] ST60+, seatalk1, seatalk NG, ray55e, A70D and ST2000+
Hi Chuck,
I understand that my system cannot have multiple heading data sources.

The intention is to use the new heading source only when the ST 2000 autopilot is disconnected from the system (which is most of the time).

I've found the compass sensors listed below at reasonable prices and would value your opinion on their suitability to connect via NMEA (without using an additional heading instrument display) to either:
- one of my ST60+ Graphic displays or
- to my A70D plotter.

- Fluxgate Compass Heading sensor Auto Pilot E12205
- Raymarine Autohelm 6000 Autopilot Fluxgate Compass
- Raymarine heading sensor E12198.
- Raymarine Fluxgate transducer E22048
- JGTech Autonnic 10Hz compass transducer NMEA 0183
- CLIPPER CL-NCS NMEA COMPASS SENSOR
- Raymarine ST60 Plus Compass System Instrument A22014-P
- Digital Yacht HSC100 High Performance Fluxgate Sensor
- Raymarine Compass Transducer Part Number: T909

regards
Dave
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] ST60+, seatalk1, seatalk NG, ray55e, A70D and ST2000+ - dave.squared@hotmail.com - 04-11-19 06:14 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us