Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Removal of MFDs after each trip
04-09-19, 10:25 AM (This post was last modified: 04-09-19 03:44 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Removal of MFDs after each trip
Quick quesiton please - my MFDs are gimbal mounted so they are easily removed (I do have them secured with Durasafe e-locks to help deter theft). As far as best practices should I remove them after each trip or to prevent wear and tear on the connections should I just remove them during the off season? They are under my T-top so not "directly" exposed to the elements.

Thanks

Jack - MS Gulf Coast
Current Ray Equipment - Axiom 7 RV serving as DM and networked to a eS127 -
Quantum Radar via WiFi to eS127, RMK-9 networked to eS127, EV-1 Sensor Core, RV-100 and B60 transducers.
Find all posts by this user
Quote this message in a reply
04-09-19, 03:46 PM
Post: #2
RE: [CA11] Removal of MFDs after each trip
Welcome back to the Raymarine Forum MSjack,

Unless concerned about theft or vandalism, there should be no need to remove the MFD from its trunion bracket between uses.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)