Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] iTC-5 and signet marine sensors
01-03-19, 07:01 PM (This post was last modified: 01-08-19 06:17 AM by Louise - Raymarine - Moderator.)
Post: #1
[LW11] iTC-5 and signet marine sensors
I have been refitting an 1976 Ericson 29. It has both a Signet Marine speed sensor and depth sensor as original equipment. I have already installed a Raymarine iTC-5 Instrument Transducer Converter for the Raymarine wind instruments and I was wondering if it is possible to connect the Signet Marine speed and depth sensors. Is this possible without damaging the iTC-5 unit? Thanks for the help.
Find all posts by this user
Quote this message in a reply
01-08-19, 07:32 AM
Post: #2
RE: [LW11] iTC-5 and signet marine sensors
Dear wprothero,

Thank you for your query.

The iTC-5 will not support the signet speed and depth transducers, it will only support our analogue transducers. Do the Signet instruments output NMEA0183 data? I have looked on the website and cannot find this information.
Depending on the sentences output by the instruments, there could be a way of integrating them on your system. What other products do you have installed on your vessel?

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)