Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] RADAR overlay on C Series
10-20-18, 02:54 PM (This post was last modified: 10-22-18 03:07 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] RADAR overlay on C Series
I have a C120 with the latest software update, v5.16. Will I be able to use the RADAR overlay again if I install v4.30?
Find all posts by this user
Quote this message in a reply
10-22-18, 03:13 PM
Post: #2
RE: [CA11] RADAR overlay on C Series
Welcome to the Raymarine Forum Max Bottomtime,

As you have suggested the C-Series Classic MFD v5.16 software requires that the MFD be interfaced to a source of heading data when seeking to use the software's radar overlay feature. Should the software of the C-Series Classic MFD be downgraded to v4.30, then the MFD will support radar overlay with the support of either heading or COG. The link to the v4.30 C-Series Classic MFD software update may be found within the software history table of the C-Series Classic MFD software update web page. When using the currently available Navionics cartography, it is recommended that the MFD be operating with v5.16 C-Series Classic MFD software.
Visit this user's website Find all posts by this user
Quote this message in a reply
10-27-18, 12:59 PM (This post was last modified: 10-29-18 08:01 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] RADAR overlay on C Series
I uploaded V.4.30 this morning and everything is working perfectly. I have the radar overlay back. :)
Find all posts by this user
Quote this message in a reply
10-29-18, 08:01 AM
Post: #4
RE: [CA11] RADAR overlay on C Series
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us