Raymarine forum / Raymarine Forums / Instruments v / [DG] [DG11] Speed no run with D800/P17 and itc-5

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] Speed no run with D800/P17 and itc-5
04-02-19, 06:12 AM
Post: #11
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: [DG11] Speed no run with D800/P17 and itc-5
Hi Francisco,

Is the speed transducer just for speed or is it both speed, temperature and depth?

If it is a separate speed, check it is correctly connected to the itc-5, is water temperature being displayed correctly on the i70s?

If yes, then please check the MDS (Multiple data source) selection in the i70 and check that the speed is selected to the itc-5.

It is possible that the system thinks that the Tridata is the master and since it is not connected to the speed transdcuer, you will only see 0.00 on the i70s.

regards
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [DG11] Speed no run with D800/P17 and itc-5 - Derek - Raymarine - Moderator - 04-02-19 06:12 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication