The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Speed display on Raymarine E15023 Smart Pilot Controller
10-31-18, 03:05 PM (This post was last modified: 10-31-18 04:03 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Speed display on Raymarine E15023 Smart Pilot Controller
Last weekend I installed a Raymarine E15023 Smart Pilot Controller. I have attached a network diagram showing how I connected the Smart Pilot into the existing network which includes a eS127 MFD, ST8001 Autopilot Controller and a S3G Autopilot Computer .

I noted the E15023 shows depth, heading and functions correctly in controlling the autopilot / direction of the boat. However it is not displaying speed. This is odd as vessel speed is correctly displaying on the MFD. Is there something I need to change or configure for it to display speed?

Thanks!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Speed display on Raymarine E15023 Smart Pilot Controller - hynespa - 10-31-18 03:05 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)