Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] axiom 9 transducer
11-01-18, 07:47 AM (This post was last modified: 11-01-18 09:30 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] axiom 9 transducer
I have an Axiom 9, Do I need the dual transducer pack on my twin screw inboard sea ray, or can I use the rv-200 single transducer, 21 degree hull angle?
Find all posts by this user
Quote this message in a reply
11-01-18, 09:35 AM
Post: #2
RE: [CA11] axiom 9 transducer
Welcome to the Raymarine Forum garybly,

Transom mounted transducers are not recommended for vessel's having inboard propulsion. I suspect that you will fined that your hull does not feature a flat spot on the keel to accommodate installation of a RV-200. In this case, it would be recommended that a thru-hull RV transducer pair appropriate for the deadrise of the installation area be installed (i.e. RV-220 or RV320).
Visit this user's website Find all posts by this user
Quote this message in a reply
11-01-18, 10:17 AM (This post was last modified: 11-01-18 11:52 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] axiom 9 transducer
I'm sorry I meant the rv-220 through hull, can I install just one transducer? I think the rv-320 comes in a kit of 2? I only want to install one if possible?
Find all posts by this user
Quote this message in a reply
11-01-18, 11:58 AM
Post: #4
RE: [CA11] axiom 9 transducer
garybly,

Tilted element thru-hull RV transducers are not designed to be installed singly. Both right and left elements of these RV transducers must be installed. The T70319 RV-220 and T70321 RV-320 20 Degree Through Hull Transducer Packs each feature a pair of transducer and a Y-Cable.
Visit this user's website Find all posts by this user
Quote this message in a reply
11-02-18, 08:54 PM (This post was last modified: 11-05-18 09:07 AM by Chuck - Raymarine - Moderator.)
Post: #5
RE: [CA11] axiom 9 transducer
Thanks for the info! I thought that was the case, wanted to make sure...
Find all posts by this user
Quote this message in a reply
11-05-18, 09:08 AM
Post: #6
RE: [CA11] axiom 9 transducer
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us