Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [split] Diagnostics - recording NMEA2000 data on Lighthouse 3 MFDs
11-02-18, 03:51 PM (This post was last modified: 11-05-18 12:46 AM by Tom - Raymarine - Moderator.)
Post: #1
[split] Diagnostics - recording NMEA2000 data on Lighthouse 3 MFDs
This is a great idea (and was there long ago on the classic E series). But logging only to the rear slot of an Axiom will make it a non-starter for many. If the Axiom is flush or surface mounted, rather than trunnion mounted, the labor overhead of removing it to access the card (at least twice per trial) will discourage it's use. Surely the bright engineers at Raymarine can figure out how to write to a slot in the RCR?
Find all posts by this user
Quote this message in a reply
11-05-18, 12:45 AM
Post: #2
RE: [split] Diagnostics - recording NMEA2000 data on Lighthouse 3 MFDs
Hello jfitch,

Agreed, and I am sure something more flexible is coming soon enough, this is just the first iteration.

Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)