Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Trouble displaying boat speed from Signet sensor
11-21-18, 01:54 PM (This post was last modified: 11-21-18 01:58 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Trouble displaying boat speed from Signet sensor
Welcome to the Raymarine Forum HKrausz,

In order for the iTC-5 to report speed, it must not only be interfaced to a compatible instrument speed through water sensor, but to a compatible water temperature sensor. Even when interfaced to such, it would be expected that the iTC-5's Speed/Temp Status LED will flash until the iTC-5 senses pulses associated with rotation of the transducer's paddlewheel.

The iTC-5's operational status may be verified by testing it with the DST800 ... there's no need to install the transducer, just plug its speed/temp leads to the iTC5, power ON the iTC-5, wait for it to initialize, and then spin the DST800s paddlewheel.
Find all posts by this user
Thread Closed 


Messages In This Thread
RE: [CA11] Trouble displaying boat speed from Signet sensor - Chuck - Raymarine - Moderator - 11-21-18 01:54 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)