Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Rudder Indicator Wires
12-05-18, 08:48 AM
Post: #4
RE: [CA11] Rudder Indicator Wires
Neal,

Unfortunately, Raymarine does not offer any rudder reference transducer extension cables. As suggested, commonly available marine grade cable of the same or larger gauge maybe used to extend the rudder reference transducer's cable. The rudder reference transducer is simply a resistance producing device. Such cable is commonly sold by the foot at marine electronics retailers such as West Marine. It is is perfectly acceptable to use a cable having a greater number of leads than is required. You may also want to consider contacting Certified Raymarine Installers to see if the will sell you some appropriate cable.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Rudder Indicator Wires - Chuck - Raymarine - Moderator - 12-05-18 08:48 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us