Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG11] Button lighting on Axiom Pro
12-03-18, 10:58 PM (This post was last modified: 12-04-18 09:49 AM by Chuck - Raymarine - Moderator.)
Post: #1
[DG11] Button lighting on Axiom Pro
Our two Axiom Pro mfds both share the same problem in that when the screen brightness is turned down for night time use, the buttons on the right hand side have such a low level of illumination that they cannot be seen. Can this be altered?
Find all posts by this user
Quote this message in a reply
12-04-18, 11:36 AM
Post: #2
RE: [DG11] Button lighting on Axiom Pro
Hi Derek,
Thank you for your feedback,

We have not had previous reports on this issue, but appreciate your feedback. There is no means of adjusting the button backlight at this time.

We have forwarded your feedback to our engineering team for their input and to be considered for future consideration.

Kind regards

Derek
Find all posts by this user
Quote this message in a reply
12-06-18, 01:03 AM
Post: #3
RE: [DG11] Button lighting on Axiom Pro
I have the same problem on our Axiom Pro displays used in search & rescue. We frequently run at night with everything in the cabin dimmed to maintain night vision. When the displays are dimmed sufficiently, the keypad buttons are almost impossible to see. Sometimes the crew has to resort to using their cell phones to see the keypad button labels. I would much prefer to see the buttons get brighter the more the display is dimmed. I have this same problem on my own Axioms.
I seem to recall previous Raymarine MFDs that had the keypad buttons brighten as the display was dimmed. That just made sense.
Find all posts by this user
Quote this message in a reply
12-06-18, 09:15 AM
Post: #4
RE: [DG11] Button lighting on Axiom Pro
Hi Derek,
Thankyou for the feedback, I will add this to the information sent to Engineering.

Regards
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us