Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] ST1000 attachment to wind vane
12-12-18, 06:51 PM (This post was last modified: 12-13-18 05:51 AM by Louise - Raymarine - Moderator.)
Post: #1
[LW11] ST1000 attachment to wind vane
Hi, can ST1000 be connected directly to a masthead transducer or does something like i60 have to be used to put it all together? Tnx
Find all posts by this user
Quote this message in a reply
12-13-18, 07:39 AM
Post: #2
RE: [LW11] ST1000 attachment to wind vane
Dear jerry111,

Thank you for your query.

The wind transducer cannot connect directly to the ST1000, it will require an instrument to convert the electrical signal from the wind transducer to seatalk 1 data.

Your ST1000 and the i60 can both network together on a ST1 network.

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
12-15-18, 05:43 PM
Post: #3
RE: [LW11] ST1000 attachment to wind vane
thank you
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)