Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Axiom Pro: dimming scree, not buttons
12-25-18, 04:34 PM (This post was last modified: 12-26-18 11:08 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Axiom Pro: dimming scree, not buttons
When dimming the intensity of Axiom Pro screens the red glow of the buttons also decreases, making them impossible to find in the dark. Any way of decoupling the dimming of the screen and buttons?
Visit this user's website Find all posts by this user
Quote this message in a reply
12-26-18, 11:12 AM
Post: #2
RE: [CA11] Axiom Pro: dimming scree, not buttons
Welcome to the Raymarine Forum RCMSAR-1,

Unfortunately, the system does not presently feature a means to decouple the button and screen brightness levels from one another. However, Raymarine is presently considering a change to this feature and it is presently hoped that it may be included within the LH3 v3.8.x or 3.9.x software updates.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us