Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST5000+ as secondary control?
01-18-19, 08:16 AM (This post was last modified: 01-18-19 10:38 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] ST5000+ as secondary control?
I have a Raymarine 400G with the ST6000+ control head. The system is working fine but I need to add a secondary control up in the tower. I have a ST5000+ head that I bought locally. I tried a quick test by plugging it into the SeaTalk network but the 5000+ could not seem to find the rudder information. Is this unit not capable of running as a control head only or are there some settings I need to change?
Thanks
Lee
Find all posts by this user
Quote this message in a reply
01-18-19, 11:04 AM
Post: #2
RE: [CA11] ST5000+ as secondary control?
Welcome to the Raymarine Forum Lee,

Please note that the ST5000+ is not an autopilot control head. The ST4000/ST4000+/ST5000/ST5000+ devices combined autopilot control head and autopilot course computer into a single device. These devices are not intended to be used a replacement for an autopilot control head or to be used as an additional autopilot control head for the system. A p70S or P70RS autopilot control head would be recommended for systems featuring a Type 150/400 autopilot course computer.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)