Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] OK to daisy chain the two ST70 MFDs?
01-13-19, 11:33 AM (This post was last modified: 01-14-19 12:55 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] OK to daisy chain the two ST70 MFDs?
They are less than 1 foot apart, and the backbone connector is less than 2 feet away.
Masterview is primarily a secondary depth gauge on the opposite side of the dash from the RL80CRC


Attached File(s)
.pdf  Beach House II Helm Electronics final.pdf (Size: 209.1 KB / Downloads: 32)
Find all posts by this user
Quote this message in a reply
01-14-19, 12:56 PM
Post: #2
RE: [CA11] OK to daisy chain the two ST70 MFDs?
Welcome to the Raymarine Forum 370Dancer,

It is indeed permissible to daisy chain the ST70 instrument displays as you have suggested.
Visit this user's website Find all posts by this user
Quote this message in a reply
01-15-19, 08:15 PM (This post was last modified: 01-16-19 11:57 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] OK to daisy chain the two ST70 MFDs?
Thank you sir.
Find all posts by this user
Quote this message in a reply
01-16-19, 11:58 AM
Post: #4
RE: [CA11] OK to daisy chain the two ST70 MFDs?
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us