Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Dragonfly Replacement
01-14-19, 10:12 AM (This post was last modified: 01-14-19 02:45 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Dragonfly Replacement
I am replacing one of the original Dragonfly models, with a Dragonfly 5 pro. I was hoping to reuse the existing wiring onboard the boat. The transducer and wiring are still in good conditiong.

Does Raymarine make an adapter cable to go from the old plug to the new one?

If not, are the old transducers, compatible with the new Dragonfly units?
Find all posts by this user
Quote this message in a reply
01-14-19, 02:51 PM
Post: #2
RE: [CA11] Dragonfly Replacement
Welcome to the Raymarine Forum Mick,

Please click here to view the Dragonfly power/transducer adapter cables. In this case, the A80332 Adapter Cable would be used to adapt "single keyway" transducers for use with Dragonfly "3-keyway" green or yellow locking collars such as are found within second generation Dragonfly fishfinders..
Visit this user's website Find all posts by this user
Quote this message in a reply
01-14-19, 04:20 PM (This post was last modified: 01-14-19 06:36 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] Dragonfly Replacement
Thanks.
Find all posts by this user
Quote this message in a reply
01-14-19, 06:37 PM
Post: #4
RE: [CA11] Dragonfly Replacement
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us