Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Connect Raystar 150 to Axiom 9
01-14-19, 04:03 PM (This post was last modified: 01-14-19 06:21 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Connect Raystar 150 to Axiom 9
I am wanting to connect a Raystar 150 to my Axiom 9 MFD. I purchased The Seatalk NG starter kit as the manual said but there is no suitable cable to connect the starter kit to the Axiom MFD. AM I missing something? With my old c80 system the remote GPS receiver plugged directly in the the C80.
Find all posts by this user
Quote this message in a reply
01-14-19, 06:27 PM
Post: #2
RE: [CA11] Connect Raystar 150 to Axiom 9
Welcome to the Raymarine Forum ktcarter,

You were indeed correct in believing that the Axiom MFD and Raystar 150 GPS Sensor were each designed to be interfaced as spurs to a powered and properly terminated SeaTalkng / NMEA 2000 backbone. However, as the NMEA 2000 communications interface of the Axiom/Axiom Pro/Axiom XL MFDs have been terminated with a DeviceNet Micro-C male plug, an A06045 0.4m SeaTalkng to DeviceNet (F) Adapter or A06075 1m SeaTalkng to DeviceNet (F) Adapter will be required to mate the MFD's NMEA 2000 socket to a spur socket (white) within the backbone.
Visit this user's website Find all posts by this user
Quote this message in a reply
01-15-19, 09:37 AM
Post: #3
RE: [CA11] Connect Raystar 150 to Axiom 9
Got her ordered and thanks for your assistance.
Find all posts by this user
Quote this message in a reply
01-15-19, 10:17 AM
Post: #4
RE: [CA11] Connect Raystar 150 to Axiom 9
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us