Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] AIS target interception zone
01-14-19, 07:18 PM (This post was last modified: 01-15-19 01:49 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] AIS target interception zone
Can the red box shown on the chart which appears to be the AIS target interception zone be disabled or turned off?

Our application is an Axiom 9 running the latest Lighthouse III software and an AIS700.
Find all posts by this user
Quote this message in a reply
01-15-19, 01:54 PM
Post: #2
RE: [CA11] AIS target interception zone
Welcome to the Raymarine Forum Addison,

The AIS Targets Predicted Area of Danger may be configured ON/OFF via the command sequence MENU->TARGETS->COLLISION AVOIDANCE->PREDICTED AREAS OF DANGER - AIS TARGETS.
Visit this user's website Find all posts by this user
Quote this message in a reply
01-16-19, 03:15 PM
Post: #3
RE: [CA11] AIS target interception zone
There it is. Thank you!
Find all posts by this user
Quote this message in a reply
01-16-19, 04:37 PM
Post: #4
RE: [CA11] AIS target interception zone
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us