Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Airmar transducer/e97 issue
01-21-19, 07:44 PM
Post: #5
RE: [CA11] Airmar transducer/e97 issue
After unplugging the offending device (AIS650) we were able to select a data source for depth; in this case it is the e97 itself.
When we try to set up the transducer from the "Fishfinder" menu the error is "Selected sounder unavailable. Still no depth information...

So we went to our other vessel that has a very similar setup, the difference is that the Airmar transducer is wired directly to the e97 without cable adapters.

It looks like someone has purchased an Airmar Transducer with the incorrect 5 pin male adapter cable, which should have been a MM-RAYA cable (Raymarine A- Series) adapter cable.

Thank you for your time, this was a very good way to get technical assistance.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Airmar transducer/e97 issue - marinemarkwenn - 01-21-19 07:44 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)