[CA] [CA11] Autopilot Integration to Seatalkng

[Chuck - Raymarine - Moderator]

Emmanuel,

In order for the i70S MFID to display AIS Targets within its AIS page, the system must include each of the following:
- an AIS receiver or AIS transceiver which has been interfaced to the system's SeaTalkng / NMEA 2000 backbone ... this has been satisfied
- the system has been interfaced to a source of GPS data ... please note that Raymarine AIS transceivers are not designed to transmit GPS data determined via the transceiver internal GPS receiver to a NMEA 2000 backbone ... no source of GPS data has been identified within your diagram.
- a source of heading data or COG ... this requirement would appear to be met when the autopilot is operation. In systems lacking a heading data, COG will be used once the vessel is underway and making way. When the vessel is stationary, it has no COG and correspondingly this feature would not be supported within systems lacking a heading data source.