Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Axiom Pro 9S Downvision
02-06-19, 08:29 PM (This post was last modified: 02-07-19 06:01 AM by Louise - Raymarine - Moderator.)
Post: #1
[LW11] Axiom Pro 9S Downvision
Hello, I have purchased an Axiom Pro S for my for for livaboard sailboat and figured a downvision transducer would be helpful for scuba diving.

1: Is it posibie to hook up a CPT-110 plastic through hull A80277 with my Axiom Pro S.

2: Would it be workable with a sailboat.

3: If so what other parts would I need.

4: If not would a CPT-S E70339 plastic 0 degrees through hull plug directly in the Axiom Pro S without needing additional modules.

Thanks, Dave
Find all posts by this user
Quote this message in a reply
02-08-19, 11:48 AM
Post: #2
RE: [LW11] Axiom Pro 9S Downvision
Dear Bahltech,

Thank you for your query.

The CPT-110 transducer is not compatible with the Axiom Pro S, only CPT-S transducers are compatible with the adapter cable A80490. Therefore the E70339 is compatible.

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
02-13-19, 04:16 PM (This post was last modified: 02-13-19 04:38 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [LW11] Axiom Pro 9S Downvision
If I wanted to add downvision for my sailboat on my Axiom Pro S, I guess I would need to add the CP100 sonar module and then connect the cpt-110, is this correct ?

Thanks
Find all posts by this user
Quote this message in a reply
02-14-19, 09:52 AM
Post: #4
RE: [LW11] Axiom Pro 9S Downvision
Dear Bahltech,

Many thanks for your query.

That is correct, if you add the CP100 sonar module the CPT-110 will be viewable over raynet from the CP100 to the Axiom. This will then give you the downvision you are after.

Have you considered the Axiom Pro RVX? The CPT-110 will connect directly to this Axiom Pro model.

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
02-20-19, 02:36 PM
Post: #5
RE: [LW11] Axiom Pro 9S Downvision
Hello, I have S model already, thats why I was inquiring of what was needed for downvision.

Thanks, Dave
Find all posts by this user
Quote this message in a reply
02-22-19, 06:20 AM
Post: #6
RE: [LW11] Axiom Pro 9S Downvision
Hi Bahltech,

Of course, do let me know if there is anything else I can assist with.

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)