Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] CPT-S series transducer specifications
02-19-19, 09:45 AM (This post was last modified: 02-19-19 03:56 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] CPT-S series transducer specifications
Regarding the CPT-S series transducers, what is the maximum power rating for the bronze thru-hull 20 degree (E70341) transducer? Also, for this same transducer, what range of frequencies does this transducer emit when interfaced with an Axiom Pro S MFD? Does this same transducer provide water temperature?

Thanks!
Find all posts by this user
Quote this message in a reply
02-19-19, 04:10 PM (This post was last modified: 02-20-19 12:01 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] CPT-S series transducer specifications
Welcome to the Raymarine cc driver,

Like the CHIRP conical element found within Dragonfly, DownVision, and RealVision transducers, the CPT-S transducers have relatively low power output (200W), particularly when compared to 1kW CHIRP and 600W / 1kW sonar alternatives. Details concerning the maximum depth range of the CPT-S transducers may be found here. Details concerning the frequencies of the CPT-S transducers may be found here. CPT-S transducers are designed to support both depth and temperature.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)