Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] E125
02-19-19, 09:34 PM (This post was last modified: 02-21-19 08:45 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] E125
Can a Raymarine E125 High Performance HybridTouch Multifunction Chartplotter E70023 provide the "joystick" control for a T200 thermal camera?
Find all posts by this user
Quote this message in a reply
02-20-19, 04:46 PM (This post was last modified: 02-21-19 08:46 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] E125
Welcome to the Raymarine Forum Terry,

Please note that the T200 is not a pan & tilt camera. The T200 is designed to be mounted in fixed azimuth and elevation angles. When interfaced to a T200, the e125 MFD's thermal camera menu will permit the operator to simply change the camera's settings (ex. palette, etc.). If seeking a pan & tilt camera, it is recommended that one consider one of FLIR's Fixed Mount Thermal Cameras such as the M132, M232, M324, M324S, or M625.
Visit this user's website Find all posts by this user
Quote this message in a reply
02-20-19, 09:44 PM (This post was last modified: 02-21-19 08:44 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] E125
Thanks Chuck

Can the e125 MFD be interfaced to FLIR's Fixed Mount Thermal Camera (such as the M132, M232, M324, M324S, or M625) and have it's thermal camera menu control those cameras?

Terry
Find all posts by this user
Quote this message in a reply
02-21-19, 08:46 AM
Post: #4
RE: [CA11] E125
Terry,

Q. Can the e125 MFD be interfaced to FLIR's Fixed Mount Thermal Camera (such as the M132, M232, M324, M324S, or M625) and have it's thermal camera menu control those cameras?
A. Yes.
Visit this user's website Find all posts by this user
Quote this message in a reply
02-21-19, 01:21 PM
Post: #5
RE: [CA11] E125
Awesome. Thanks Chuck.
Find all posts by this user
Quote this message in a reply
02-21-19, 02:17 PM
Post: #6
RE: [CA11] E125
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us