Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] AXIOM 9 TRANSDUCER SELECTION
04-13-19, 02:58 AM (This post was last modified: 04-17-19 10:47 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [TG11] AXIOM 9 TRANSDUCER SELECTION
Tom,
thanks for the reply.
I'm thinking of option 3. Adding the cp370 plus a 1kw tranny.
Can i run the rv100 as well as the 1kw or is that just a waste? someone told me you can get a switch to run both.

I have access to the fibreglass hull with no interference from the trailer and plenty of room on the transom. What would be the preferred transducer for either setup.

I LIKE THE CP470/370 WITH THE 1 KW TRANNY IDEA.
I HAVE GOOD ACCESS TO THE BOTTOM OF THE HULL FOR A THRU HULL AND PLENTY OF ROOM ON THE TRANSOM FOR A TRANSOM MOUNT TRANNY.
WHICH ONE IS THE BEST OPTION?

THE CARIBBEAN 2300 HAS A 24DEG DEADRISE

FIBREGLASS

SO CAN I HAVE BOTH THE NEW TRANNY AND THE RV100 CONNECTED OR JUST THE NEW TRANNY?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] AXIOM 9 TRANSDUCER SELECTION - DOBBY - 04-13-19 02:58 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)