Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] SeaTalkhs 2 ports on the MFD? Why?
02-24-19, 12:04 PM (This post was last modified: 02-25-19 01:12 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] SeaTalkhs 2 ports on the MFD? Why?
There are 2 network ports on both the eS9 and eS12 series MFD's. I can find no information as to how the 2 ports are used or what they are intended for. Can someone direct me to this information?

D..
Find all posts by this user
Quote this message in a reply
02-25-19, 01:25 PM (This post was last modified: 02-25-19 01:26 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] SeaTalkhs 2 ports on the MFD? Why?
Welcome to the Raymarine Forum mainehunter426,

The 9" & 12" a/c/e/eS-Series MFDs each feature two Ethernet Network (RayNet) communications interfaces to permit these MFDs to be interfaced to up to two additional compatible devices having an Ethernet communications interface (ex. other MFDs, radomes, open array pedestals, fishfinder sounder modules, SiriusXM Satellite Weather / Radio Receiver, thermal camera(s), IP camera(s), Remote Keyboard(s), etc.). Within a simple system of two 9" or 12" MFDs, one of these interfaces from each MFD's to one another (via an appropriate length of RayNet(F) to RayNet (F) Cable) to permit the system's Data Master MFD to share all system data and resources (except for analog (NTSC/PAL) camera video) with the system's repeater MFD. Should the MFD(s) need to be interfaced to more compatible devices having an Ethernet communications interface than are supported by the available number of MFD Ethernet Network (RayNet) communications interfaces, then it would be necessary to install a HS5 RayNet Network Switch(es) within the system, to handle the additional devices which on wants to interface to the system.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)