Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom 9 wiring
02-27-19, 01:42 AM (This post was last modified: 02-27-19 03:05 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Axiom 9 wiring
I’ve searched the e manual for the Axiom, but I cannot find what kind of cable connects to the power pigtail to connect to the backbone.
M
Find all posts by this user
Quote this message in a reply
02-27-19, 03:47 PM (This post was last modified: 02-28-19 09:27 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Axiom 9 wiring
Welcome to the Raymarine Forum SVBREILA,

An A06045 / 15.7in (0.4m) SeaTalkng Spur to DeviceNet (F) would be used for this purpose if not additional cable length is required. Please click here to view a FAQ addressing other options should a longer spur need to be created. Please additionally pay notice to the maximum spur length specified within the FAQ which I had previously referenced.
Find all posts by this user
Quote this message in a reply
02-27-19, 07:46 PM (This post was last modified: 02-28-19 09:24 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] Axiom 9 wiring
Thanks Chuck,
I did find it about 30 mins after I posted. Does this only come in the short length?
M
Find all posts by this user
Quote this message in a reply
02-28-19, 09:28 AM
Post: #4
RE: [CA11] Axiom 9 wiring
SVBREILA,

Q. Does this only come in the short length?
A. Please refer to the FAQ referenced within my initial response.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)