Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11) Interfacing AIS350 with Axiom 9
03-01-19, 02:39 PM
Post: #2
RE: [CA11) Interfacing AIS350 with Axiom 9
Unlike the more feature laden Axiom Pro and Axiom XL MFDs, Axiom MFDs do not feature a NMEA 0183 communications interface. Accordingly, it would be recommended that these products be interfaced to one another via their respective SeaTalkng / NMEA 2000 communications interfaces. In short, a powered and properly terminated SeaTalkng / NMEA 2000 backbone must be installed onboard and the AIS350 and Axiom MFD would then each be interfaced as spurs to this backbone. Please click here to view a FAQ addressing how a simple SeaTalkng / NMEA 2000 backbone may be constructed from SeaTalkng networking components.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11) Interfacing AIS350 with Axiom 9 - Chuck - Raymarine - Moderator - 03-01-19 02:39 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us