Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Using iPad with Axiom 7
03-02-19, 10:14 AM (This post was last modified: 03-04-19 04:29 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Using iPad with Axiom 7
What Apple iOs version is necessary to link Axiom 7 RV via bluetooth with iPhone and iPad?

Does the Raymarine Axiom link software work with iPad running iOs 9.5.3?

What are the iOS capabilities and where does one download the App for iPad and iPhone?
Find all posts by this user
Quote this message in a reply
03-04-19, 04:28 PM
Post: #2
RE: [CA11] Using iPad with Axiom 7
Welcome to the Raymarine Forum Eugene,

Q1. What Apple iOs version is necessary to link Axiom 7 RV via bluetooth with iPhone and iPad?
A1. Raymarine has not indicated any specific versions of Apple iOs which are required for the RayControl (iPad) and RayRemote (iPhone) apps. In short, hardware and iOS compatibility is verified the Apple Store, in that the store will only list apps which have been approved for use on the device which is accessing the Apple Store.

Q2. Does the Raymarine Axiom link software work with iPad running iOs 9.5.3?
A2. Again, no specific requirements here. When running the Raymarine apps, it is the mobile device which must be commanded to connect to the MFD, not vice versa.

Q3. What are the iOS capabilities and where does one download the App for iPad and iPhone?
A3. As indicated within the response to Q1, the Raymarine Mobile Apps are downloaded from the Apple Store. Details concerning Raymarine's Mobile Apps may be found on the Raymarine Mobile Apps web page.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us