Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Auto-Pilot that works with RL80CRC
03-06-19, 11:07 AM (This post was last modified: 03-06-19 04:11 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Auto-Pilot that works with RL80CRC
Hello, I am looking for an auto-pilot that will work with my older chartplotter RL80CRC
My Set up is:
2004 Pursuit 2670 Denali
Twin Yamaha F200s
Hyradaulic Steering- P/N HC5358

Can anyone recommend an auto-pilot that will work well with this set up? I would like to be able to control the auto-pilot through my chartplotter

Thanks
Find all posts by this user
Quote this message in a reply
03-06-19, 04:12 PM
Post: #2
RE: [CA11] Auto-Pilot that works with RL80CRC
Welcome to the Raymarine Forum Downrod,

Does the boat feature one steering ram or two? If the boat features two steering rams, are the rams plumbed in series or in parallel?
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us