Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] CP 470 cables
03-08-19, 09:22 AM (This post was last modified: 03-08-19 10:14 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] CP 470 cables
I recently acquired a new ES127, so I have all the appropriate cables to install it. I also bought a CP470 to go with the ES127. The person I purchased it from was installing a new unit and kept his cables. So what do I need to connect these and will they work with my older dsm300.
Find all posts by this user
Quote this message in a reply
03-08-19, 10:21 AM
Post: #2
RE: [CA11] CP 470 cables
Welciome to the Raymarine Forum RKW68,

The eS12x MFDs feature two Ethernet NETWORK (RayNet) sockets permitting up to two compatible products featuring an Ethernet communications interface to be connected to the MFD without need for a network switch. The eS127 MFD will be interfaced to the CP470 via an appropriate length of RayNet (F) to RayNet (F) Cable. As the DSM300's Ethernet communications interface features a SeaTalkhs socket, the DSM300 would be interfaced to the MFD via a cable assembly constructed from an A80272 RayNet (M) to SThs (M) Socket Adaptor and an appropriate length of RayNet (F) to RayNet (F) Cable.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us