Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] C80 MFD and RS130
03-11-19, 12:00 PM
Post: #2
RE: [CA11] C80 MFD and RS130
Welcome to the Raymarine Forum Chris,

Q1. My question about getting this set up is, does that RS130 have to be networked through the Seatalk 1 to Seatalkng converter kit, E22158?
A1. Yes. Please click here to view a FAQ addressing this subject. Please additionally note that the Raystar 130 GPS Sensor has been succeeded by the Raystar 150 GPS Sensor, both of which would be interfaced to a C-Series Classic MFD in the same manner.

Q2. Or can I network this through a Seatalkng 5-way connector, CWRE-33175, with a Seatalk 2 to Seatalkng adapter cable, A06048, plugged into the back of my C80 MFD?
A2. Negative. The software of C-Series Classic MFDs is not designed to support SeaTalkng communications.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
[CA11] C80 MFD and RS130 - Capt Joll - 03-09-19, 09:29 AM
RE: [CA11] C80 MFD and RS130 - Chuck - Raymarine - Moderator - 03-11-19 12:00 PM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us