[CA] [CA11] Fuel readings for individual engines / tanks
|
03-10-19, 03:30 PM
(This post was last modified: 03-11-19 12:44 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA11] Fuel readings for individual engines / tanks
Background:
Using a dedicated A68, set up 2 x 300hp Suzuki engine interfaces using a N2K network. All works great, got all the engine data I need. Using the Raymarine Fuel manager, it only asks for total fuel capacity. In the DATA screen and under FUEL, when customising, you can select Fuel remaining Tank 1 and Tank 2. Can you use these fields with an engine interface, or are these designed for fuel tank sensors / senders? How do I set initial capacity and assign, for example Tank 1 to Port Engine? As they will only show % remaining, I think they may only be for senders, but thought I would check. Cheers Adam |
|||
03-11-19, 12:57 PM
(This post was last modified: 03-11-19 12:58 PM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
RE: [CA11] Fuel readings for individual engines / tanks
Welcome to the Raymarine Forum Adam,
Q1. Can you use these fields with an engine interface, or are these designed for fuel tank sensors / senders? A1. As you have suggested the tank level data items are exclusively intended to be populated from data received from NMEA 2000 fluid level sensors. The LightHouse II/3 Fuel Manager feature will only populate the Est. Fuel Remaining, Fuel Flow Total, Economy, Distance To Empty, Time to Empty, Fuel Used (Trip), and Fuel Used (Season) data items. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)