[CA11] Axiom Pro - Lack of Range Buttons

Thread Rating:

1 Vote(s) - 4 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Axiom Pro - Lack of Range Buttons

03-11-19, 03:28 PM (This post was last modified: 03-12-19 09:47 AM by Chuck - Raymarine - Moderator.)

Post: #1

Type1

Junior Member

Posts: 27
Joined: Feb 2019
Reputation: 0

[CA11] Axiom Pro - Lack of Range Buttons

We operate with the touch screen locked out. The lack of hard range + - buttons prevents the radar operator from ranging + - while the VRM/EBL is active. To change the range it is necessary to deactivate or freeze the VRM/EBL, change the range, then reactivate the VRM/EBL. To reactivate the VRM/EBL requires 6 separate button or rotary dial actions.

Would it be possible to provide an option for the user programmable button to activate the number 1 VRM/EBL with a single press?

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Axiom Pro - Lack of Range Buttons - Type1 - 03-11-19 03:28 PM

RE: [CA11] Axiom Pro - Lack of Range Buttons - Chuck - Raymarine - Moderator - 03-12-19, 09:52 AM

RE: [CA11] Axiom Pro - Lack of Range Buttons - Type1 - 03-15-19, 01:51 PM

RE: [CA11] Axiom Pro - Lack of Range Buttons - Chuck - Raymarine - Moderator - 03-15-19, 02:39 PM

RE: [CA11] Axiom Pro - Lack of Range Buttons - Chuck - Raymarine - Moderator - 03-18-19, 08:30 AM

RE: [CA11] Axiom Pro - Lack of Range Buttons - Type1 - 03-18-19, 11:21 AM

RE: [CA11] Axiom Pro - Lack of Range Buttons - Whiskey River - 12-26-19, 10:52 AM

RE: [CA11] Axiom Pro - Lack of Range Buttons - voombaloo - 11-11-19, 01:34 AM

RE: [CA11] Axiom Pro - Lack of Range Buttons - Chuck - Raymarine - Moderator - 12-27-19, 10:19 AM

User(s) browsing this thread: 1 Guest(s)