Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] e120 MFD with a E 80 and E 120 satellite change
04-01-19, 03:10 PM (This post was last modified: 04-01-19 03:19 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] e120 MFD with a E 80 and E 120 satellite change
Concerning the new GPS satellite update. I would like to know what do I do with the a E 80 and E 120 seatalk 1 and 2 on my s3g and my nmea which runs from the s3g to the mfds. I also have a RN300 GPS a Ais 650 and 7 more sailing instruments and a Ray 240 VHF.
Thank You,
'Eric
Find all posts by this user
Quote this message in a reply
04-01-19, 03:30 PM
Post: #2
RE: [CA11] e120 MFD with a E 80 and E 120 satellite change
Welcome to the Raymarine Forum Eric,

Please click here to view a FAQ addressing this subject. The RN300 GPS experienced GPS rollover in 2017 and as such will perform in the same manner as it has for the last couple of years. If seeking to address GPS rollover within this system, it would be recommended that a Raystar 150 GPS Sensor be interfaced to the system and that the RN300 be reconfigured to be a GPS repeater instead of a GPS master. Please click here to view a FAQ addressing how one may interface a Raystar 150 GPS Sensor to a system of E-Series Classic MFDs.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)