Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] RV-100 Rated Power
03-11-19, 09:00 PM (This post was last modified: 03-12-19 09:22 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] RV-100 Rated Power
Hi, Currently have an Axiom 9, with RV-100 Transducer. I seem to be maxed out at about 100m using Sonar, So i am looking to fit another transducer with a Y cable.
When I purchased this Axiom, i was under the impression that the RV-100 is a 600w high chirp. But after some more reading it appears its actual power is alot less?

I Dont want to fit another transducer to find similar depth performance, so can you please confirm the output power of the RV-100.

Cheers, Luke.
Find all posts by this user
Quote this message in a reply
03-12-19, 09:35 AM
Post: #2
RE: [CA11] RV-100 Rated Power
Welcome to the Raymarine Forum Luke,

Please click here to view a FAQ addressing this subject. As indicated within the referenced FAQ, the low power / high frequency CHIRP element of the RealVision, DownVision, and CPT-S transducers will output 200W. Axiom DV MFDs and Axiom RV MFDs feature an internal 600W 50kHz/200kHz fishfinder circuitry as well, permitting the MFD to simultaneously be interfaced to a compatible 50kHz/200kHz fishfinder transducer via a Y-Cable to support fishfinding in deeper waters than are supported by the RealVision transducers. I recommend using a fishfinder transducer designed for use with a CP370 Digital Sounder Module, as they have the greatest level of compatibility with Raymarine products. The A80492 Y-Cable would be used in systems featuring a RealVison transducer and a fishfinder transducer designed for use with a CP370 Digital Sounder Module.
Find all posts by this user
Quote this message in a reply
03-12-19, 01:42 PM
Post: #3
RE: [CA11] RV-100 Rated Power
Thank You Chuck.
Find all posts by this user
Quote this message in a reply
03-12-19, 01:47 PM
Post: #4
RE: [CA11] RV-100 Rated Power
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)