Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] TackTick NMEA GPS to MFD to ST1000+
03-16-19, 03:57 AM (This post was last modified: 03-19-19 02:49 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] TackTick NMEA GPS to MFD to ST1000+
Hi!

Setup: TackTick 110, 111, 112, Fluxgate, MicroTalk, A-Series, ST1000+

I have added a 122 NMEA Interface and connected a GPS (Evermore). GPS data will be shown at the Displays but not in the A-Series MFD. Was a redundancy idea.

All other TackTick Data will be shown in the A-Series.

I want(ed) to connect the ST1000+ to the NMEA Out of the 122 Interface and control the ST1000 by the A-Series. So the dataflow will be a-series - microtalk - (TackTick - microtalk) - T122 - St1000+.

Any suggestion?

Cheers, Peter
Find all posts by this user
Quote this message in a reply
03-19-19, 02:50 PM
Post: #2
RE: [CA11] TackTick NMEA GPS to MFD to ST1000+
Welcome to the Raymarine Forum Peter,

Which model of "A-Series" MFD do you own?
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us