Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG11] e95 hybrid -Problems after System Reset
03-17-19, 11:09 AM (This post was last modified: 03-18-19 08:08 AM by Derek - Raymarine - Moderator.)
Post: #1
[DG11] e95 hybrid -Problems after System Reset
The MFD is no longer able to turn on radar or detect AIS. There was no issue with this before I did a reset. The reset was done because I forgot the password to the iPad Navionics App for sync purposes.
Find all posts by this user
Quote this message in a reply
03-18-19, 08:11 AM
Post: #2
RE: [DG11] e95 hybrid -Problems after System Reset
Hi skiprboy

Which reset did you use? If you used the full reset, then you will have set the unit back to the initial factory default settings, this will require you to reconnect to the radar - if Quantum, you will need to re- pair with the radar and reset the NMEA connections on the MFD to AIS 38400 baud rate.

Regards
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us