The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] SmartController shows NO PILOT on display
03-17-19, 03:39 PM (This post was last modified: 03-19-19 01:03 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] SmartController shows NO PILOT on display
Hi Chuck,

My SmartController E15025 was previously working but now shows “NO PILOT” on the display. The S3G autopilot computer and P70R autopilot controller are otherwise working (S3G), and autopilot control from the eS127 MFD also works normally.

I tried following the instructions in the SmartController instruction manual to deregister and reregister with the base station. It finds the base station and successfully reregisters, but still displays “NO PILOT”. Any other steps I can take to troubleshoot?

I have attached a PDF showing the full wiring diagram and setup of my Raymarine systems.

Thanks,

Patrick
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] SmartController shows NO PILOT on display - hynespa - 03-17-19 03:39 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)