Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG11] X5 unit work with st6001 and hydraulic type 1
03-18-19, 08:47 AM (This post was last modified: 03-18-19 10:14 AM by Derek - Raymarine - Moderator.)
Post: #1
[DG11] X5 unit work with st6001 and hydraulic type 1
My s1 has died, will the X5 work in its place. St 6001 with hydraulic tyoe1, Flux gate and rudder feedback. Also, what other core units will work with this
Find all posts by this user
Quote this message in a reply
03-18-19, 10:17 AM
Post: #2
RE: [DG11] X5 unit work with st6001 and hydraulic type 1
HI captdana

Thank you for your enquiry.

The SPX5 is not suitable for a T1 Hydraulic pump, it can only be used with the Cockpit tiller or wheel drive units or the Raymarine 0.5litre hydraulic pump.

The SPX10 is the course computer that you want to locate. This will work with the Control unit, compass and rudder reference units that you already have.

Thanks
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us