Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
transducer lead length
05-07-16, 06:52 PM
Post: #1
transducer lead length
First request on this site. I have upgraded my system from ST60+ to the networking system when I installed our autopilot. I have purchased the itc5 modual and would like to use the st60+ transducers for depth and speed to intergrate into the system with a new multifunction display.

Question I have is can I shorten the transmitters lead length on the speed and depth transducers and hook into the ITC5 modual without effecting their function.

Thanks in advance.
Find all posts by this user
Quote this message in a reply
05-09-16, 09:52 AM
Post: #2
RE: transducer lead length
Welcome to the Raymarine Forum Gulfstar,

While the speed transducer cables may be shortened, it is not recommended that depth or temperature instrument transducers cables be shortened. As a best installation practice, it is recommended that excess transducer cable be loosely coiled (minimum bend radius not less than 3") and secured to a bulkhead.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)