Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Connect Yanmar 3JH4E to SeaTalkng Network
03-19-19, 07:48 AM (This post was last modified: 03-19-19 11:00 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Connect Yanmar 3JH4E to SeaTalkng Network
Hello,

I was wondering how I can connect my Yanmar 3JH4E engine to my existing Raymarine SeaTalkng network to display the engine stats on my Axiom 7 and 9 networked displays. I see there is an ECI-100 but I don't see my engine listed in the list of compatible engines.

If I can connect this engine, what will I need, how will it be done and what type of data should I expect to see?
Find all posts by this user
Quote this message in a reply
03-19-19, 11:01 AM
Post: #2
RE: [CA11] Connect Yanmar 3JH4E to SeaTalkng Network
ventus,

How old is the subject Yanmar engine?
Visit this user's website Find all posts by this user
Quote this message in a reply
03-21-19, 02:23 PM (This post was last modified: 03-21-19 02:58 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] Connect Yanmar 3JH4E to SeaTalkng Network
Hi Chuck, it is a 2005/2006 model. The boat is a 2006 but it was built in 2005.
Find all posts by this user
Quote this message in a reply
03-21-19, 03:03 PM
Post: #4
RE: [CA11] Connect Yanmar 3JH4E to SeaTalkng Network
ventus,

Unfortunately, it would appear that the ECI-100 is not compatible with this engine. Other engine gateways to consider would be Maretron's J2K100 or possibly one of the engine gateways from Yacht Devices.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us