Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Can a P70R autopilot follow a trail with a a98 maltidisplay unit
03-24-19, 06:28 PM (This post was last modified: 03-25-19 03:39 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Can a P70R autopilot follow a trail with a a98 maltidisplay unit
I have a P70R power head with a Evolution EV1 sensor core Autopilot ,a98 multifunction display and a Quantum radar.
The auto will fallow a route ,but will not fallow a trail .
I want to use for fishing but can't seem to get it to fallow fishing trail that I made earlier
Can I make this happen thanks
Don
Find all posts by this user
Quote this message in a reply
03-25-19, 03:43 PM
Post: #2
RE: [CA11] Can a P70R autopilot follow a trail with a a98 maltidisplay unit
Welcome to the Raymarine Forum Don,

When interfaced to a compatible chartplotter/MFD, Raymarine's autopilots are designed to support tracking (i.e. Track mode) to a waypoint or follow a route. Raymarine systems are not designed navigate/follow tracks (bread crumb trails). Routes may be created manually and systems running the latest LightHouse 3 / II software using C-Map or Navionics cartography having active subscriptions support automatically generated routes. While Raymarine MFDs support creating a route from a track, it is strongly recommended that the resulting route follow the desired path.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)