Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Transducer options
03-27-19, 09:12 AM (This post was last modified: 03-27-19 11:59 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Transducer options
I recently purchased a ES127 , and a CP 470, that boat has a dsm 300 on board but dated electronics. My boat is a 26' Regulator. I would like to know what is the best transducer option and how they should be connected. I don't see myself fishing in more than 600 ft of water. but is a slim possibility.
Thank you
Find all posts by this user
Quote this message in a reply
03-27-19, 12:00 PM
Post: #2
RE: [CA11] Transducer options
Welcome to the Raymarine Forum RKW68,

Is the boat trailered?
Find all posts by this user
Quote this message in a reply
03-28-19, 08:38 AM (This post was last modified: 03-28-19 09:24 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] Transducer options
Occasionally, the boat will spend the majority of its time on a boat lift on the Inter coastal waterway. The occasional trailering to go up the coast for tuna and home for winter.
Find all posts by this user
Quote this message in a reply
03-29-19, 08:03 AM
Post: #4
RE: [CA11] Transducer options
RKW68,

The T70077 B175 MH 20° 1KW CHIRP transducer would be recommended for this application. It supports hulls having 16-24° of deadrise (the Regulator 26 appears to have 24° of deadrise at the transom).
Find all posts by this user
Quote this message in a reply
03-29-19, 08:59 AM (This post was last modified: 03-29-19 10:23 AM by Chuck - Raymarine - Moderator.)
Post: #5
RE: [CA11] Transducer options
Thanks
Find all posts by this user
Quote this message in a reply
03-29-19, 10:23 AM
Post: #6
RE: [CA11] Transducer options
You're welcome.
Find all posts by this user
Quote this message in a reply
04-01-19, 07:16 AM (This post was last modified: 04-01-19 08:14 AM by Chuck - Raymarine - Moderator.)
Post: #7
RE: [CA11] Transducer options
I looked for the transducer you suggested, I was thinking it was a single transducer but cant find a MH model. I assume that you are talking about 2 separate transducers a B175m and a B175H bot at 20 degrees. If you could please clarify to be sure I am correct.

Thanks
Find all posts by this user
Quote this message in a reply
04-01-19, 08:24 AM
Post: #8
RE: [CA11] Transducer options
RKW68,

I was indeed referencing two transducers. The part number which I had supplied includes a medium freq and a high freq transducer and the Y-Cable used to join these transducers to one another. Should you open Raymarine’s web page for CP470/570 Transducers and then click on the Single Element Transducers tab, you will find the T70077 B175 MH 20° 1KW CHIRP transducer listed.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)