Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] EV100 & old wind vane - via ITC5
03-24-19, 08:12 PM (This post was last modified: 03-26-19 08:52 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] EV100 & old wind vane - via ITC5
Hi,

I've got an EV100 installed with a P70 display and I recently bought an ITC5 in order to get older data's running on the main screen (P70).

So far Depth is shown ok on the P70 screen but I got trouble on the windvane. The led on the box is ok (as for depth) but the display is showing No wind nor any direction it just display -.-.

The windvane is alledgedly from a ST60+

I'll try to check with the procedure that the windvane works properly (found on the forum a thread about how).

But eventually : am I missing something ? Like is there necessity to have a separate display wich will convert the signals or the P70 is suppose to be enough via ITC5 ?

Have a nice day
Find all posts by this user
Quote this message in a reply
03-26-19, 08:54 AM
Post: #2
RE: [CA11] EV100 & old wind vane - via ITC5
Welcome to the Raymarine Forum Jerry,

Should the wind vane be interfaced to an iTC-5, then the system must additionally feature an i70S/i70 Multifunction Instrument Display (MFID). The MFID is responsible for calibration of the wind transducer.
Visit this user's website Find all posts by this user
Quote this message in a reply
03-26-19, 10:09 PM
Post: #3
RE: [CA11] EV100 & old wind vane - via ITC5
Thank you for your answer,

Would an I40 dedicated to wind work too ?

I'll check the windvane for sinals and then investon one of these solutions.
Find all posts by this user
Quote this message in a reply
03-27-19, 08:09 AM
Post: #4
RE: [CA11] EV100 & old wind vane - via ITC5
Jerry,

Q. Would an I40 dedicated to wind work too ?
A. Negative. The masthead wind transducer is designed to be interfaced to an i60 Wind instrument or to an iTC-5 Analog Instrument Converter. As indicated within my earlier response, should the wind transducer be interfaced to an iTC-5, then the system must feature an i70S/i70 MFID.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us