Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] Axiom 9
03-28-19, 06:16 AM (This post was last modified: 03-28-19 09:32 AM by Derek - Raymarine - Moderator.)
Post: #5
RE: [DG11] Axiom 9
Hello Derek,
Thank you
It might be the opportunity to tackle all the problems. My ship is equipped with the latest new Mercury V6 Fourstroke 200 hp engine (June 2018). he is connected to the Raymarine system (Axiom 9) via a Mercury interface ( see attachement ). system has been checked by Paul who installed the Raymarine installation on the ship
It now appears from the beginning that there is a problem with the Fuel Manager (see photos in the attachment), Sander has already reported this several times to Raymarine (UK?). It now appears that with the 3.8.97 software update of January 2019 Raymarine has checked and solved the problem. From the photos (from the month of March) you can see that this is not the case with my installation. The nm and the operating hours are correct. The consumption is going in all directions. Only the total consumption (season) is correct
Regards
Marc


Attached File(s) Thumbnail(s)
       

.pdf  Interfase Mercury 1.pdf (Size: 744.21 KB / Downloads: 223)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG11] Axiom 9 - marc casselman - 03-27-19, 07:10 AM
RE: [DG11] Axiom 9 - marc casselman - 03-27-19, 11:53 AM
RE: [DG11] Axiom 9 - marc casselman - 03-28-19 06:16 AM
RE: [DG11] Axiom 9 - marc casselman - 04-08-19, 04:19 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)