[CA] [CA11] Electrical connector for grounding drain wire with ACU-200 is too small

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum svviolethour,

Drains are provided to bond the system's components and drain away excess potential. While connecting the power leads to the ACUs should be fitted with such heaving gauge wire, it would be overkill to use such heavy gauge wire for the drain lead. I found myself doing precisely what you had done when I installed an ACU200 onboard my own boat.

A problem report will be logged with Raymarine's autopilot team to consider changes to the document suggesting a wire gauge which is matched to the supplied blade connector.