Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] how to convert s3g autoplot to sea talkng
04-03-19, 11:17 AM (This post was last modified: 04-03-19 12:40 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] how to convert s3g autoplot to sea talkng
My S3G supplies power and data to most of my st60+ instruments and autopilot heads.st 6001 and st 7001.
How do I interface this to sea talk NG and my e120 and e80 chart plotters?
Thanks
Find all posts by this user
Quote this message in a reply
04-03-19, 01:06 PM
Post: #2
RE: [CA11] how to convert s3g autoplot to sea talkng
Welcome to the Raymarine Forum kimberlite,

Please click here to view a FAQ addressing this subject. The process should begin with ensuring that the MFD's have been updated with v5.69 E-Series Classic MFD software and if not that the software within the MFDs be updated accordingly. Raymarine offers the A06061 / 4.92in (1.5m) Adapter Cable to permit the Data Master MFD to be interfaced to a spur socket within the backbone via the MFD's SeaTalk2/NMEA 2000 socket.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)