Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] Ghost vessel ( My own ) on AIS list and MFD
04-03-19, 06:34 PM
Post: #2
RE: Ghost vessel ( My own ) on AIS list and MFD
Hello Bob,

I remember logging an Engineering problem report about this many years ago. The short answer is, it's the AIS receiver's responsibility to filter own-ship data before sending to the MFD, rather than the MFD's to filter this. It's the AIS's responsibility because it's the specialist device with access to all of the relevant information, including own-ship transmissions and MMSI number. We don't want to have the MFD attempt to filter traffic on the basis of incomplete information - what if we filter the wrong target?

On AIS650 specifically, there was a software bug which meant that it failed to filter own-ship data from messages received from shore-based AIS repeater stations (see the details on v1.6 software for AIS650 here.)

Your AIS650 sounds like it needs a software update (latest is v2.02), whilst the same probably applies to the other-brand AISes you and your friend have. You can download AIS650 from the page I linked to above.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Ghost vessel ( My own ) on AIS list and MFD - Tom - Raymarine - Moderator - 04-03-19 06:34 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)