Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG11] VHF and FM radio with AIS 250 when power off?
04-07-19, 07:03 AM (This post was last modified: 04-09-19 11:41 AM by Chuck - Raymarine - Moderator.)
Post: #1
[DG11] VHF and FM radio with AIS 250 when power off?
I got an old AIS 250 receiver, on that unit I can connect my VHF antenna. There are outputs for my VHF unit and FM-radio antenna. But I do not find any information in the documentation if AIS250 must be under power when if I I use my VHF and FM-radio. Can I use my VHF and listen to my FM-radio when my AIS 250 is turned off, i.e. the splitting is passive or is it active and I have to have the AIS 250 under power?
Find all posts by this user
Quote this message in a reply
04-10-19, 09:11 AM
Post: #2
RE: [DG11] VHF and FM radio with AIS 250 when power off?
Hi Stefan,

The AIS250 should remain turned on since the built-in splitter is an active version - this is to ensure minimal performance losses through the splitter.


regards
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us